LyondellBasell HDPE Supply

Ascent Group is a dedicated LyondellBasell HDPE supplier, stocking Hostalen, Alathon and Lupolen grades for pipe, blown film, blow molding and conduit converters worldwide.

Request a Quote Explore Grades

10 core grades · 25 kg bags & bulk · FOB / CIF

10 Core HDPE Grades

PE100 Pressure Pipe Class

ASTM F2160 Conduit Compliant

3 LyondellBasell Brands

Why Ascent Group

Ascent Group sources LyondellBasell bimodal HDPE through authorised channels and supplies it to converters worldwide with full lot traceability. Every shipment is matched to its production lot and TDS revision, so the resin you qualify is the resin you receive.

Beyond supply, we provide grade-level technical support — processing windows, export documentation and responsive logistics — so your purchasing and production teams can order Hostalen, Alathon and Lupolen grades with confidence.

HDPE Grade Portfolio

Ten LyondellBasell HDPE grades across blow molding, blown film, pressure pipe and conduit.

LyondellBasell HDPE resin supplied in 25 kg PE bags — LyondellBasell HDPE — 25 kg PE bags

One Resin, Three Formats

Every grade in this portfolio is pelletised resin, lot-marked and supplied in the packaging your line is set up to receive.

25 kg PE bags — shrink-wrapped on pallets for manual or automatic feeding.
500 / 1000 kg jumbo bags — for bulk conveying and silo systems.
Octabins — for trial runs and smaller batch production.

Hostalen

4 grades

Hostalen ACP 5831 D

0.958 g/cm³ MFR 0.30 Extrusion blow molding

Small blow molded bottles, jerry cans and consumer articles needing high stiffness with high ESCR.

Hostalen ACP 5331 A

0.952 g/cm³ MFR 6.5 Extrusion blow molding

Jerry cans and drums up to 60 L for dangerous goods, balancing stiffness and ESCR.

Hostalen CRP 100

0.959 g/cm³ MFR 0.05 Pipe extrusion

PE100 pressure pipe for water and gas, with FNCT above 1000 hours.

Hostalen ACP 9240 PLUS

0.946 g/cm³ MFR 6.0 Blown film

Heavy-duty bags, FIBC liners and carrier bags with dart drop above 300 g.

Alathon

4 grades

Alathon L5005

0.949 g/cm³ MFR 0.06 Blown film

HMW bimodal film for merchandise bags, grocery sacks and can liners, dart drop 340 g.

Alathon L4907

0.949 g/cm³ MFR 0.075 Blown film

HMW film for grocery sacks, produce bags and roll stock, dart drop 260 g.

Alathon L5040TC

0.949 g/cm³ MFR 0.40 Pipe / conduit extrusion

Telecom and power conduit meeting ASTM F2160 and cell class PE435580A.

Alathon 9307TC

0.949 g/cm³ MFR 0.07 Pipe extrusion

Corrugated conduit and demanding conduit runs, cell class PE445560.

Lupolen

2 grades

Lupolen 5261 Z

0.954 g/cm³ MFR 2.0 Extrusion blow molding

Open-top drums and jerry cans for dangerous goods, supplied as powder.

Lupolen 4261 A

0.946 g/cm³ MFR 8.5 Extrusion blow molding

Large industrial containers and IBC bodies requiring high impact strength.

Typical Properties

Selected grades with typical values from LyondellBasell technical data sheets.

Grade	Density (g/cm³)	MFR (g/10 min)	Tensile Modulus (MPa)	Class / MRS	Melt Temp (°C)
Hostalen ACP 5831 D	0.958	0.30 @2.16 kg	1350	—	180–210
Hostalen ACP 5331 A	0.952	6.5 @21.6 kg	1050	—	180–220
Hostalen CRP 100	0.959	0.05 @2.16 kg	1100	PE100 / MRS 10 MPa	—
Hostalen ACP 9240 PLUS	0.946	6.0 @21.6 kg	900	—	200–230
Lupolen 5261 Z	0.954	2.0 @21.6 kg	1200	—	190–220
Alathon 9307TC	0.949	0.07 @2.16 kg	972 (flexural)	PE445560	—

Typical values from LyondellBasell technical data sheets. Not to be construed as specification limits — confirm against the current TDS before ordering.